The Test Machines are controlled in closed loop by a high performance PC Touch Screen, which allows to operate Automatically in the realization of the tests, by means of the Software of Tests of Materials modular “METROTEST”. We have a wide range of test accessories (Grips, Extensometers, Thermal Test Chambers, Bending Test Devices, Special Tools Tests Devices).
Thermal Test Chambers CTE-1 prepared for coupling to the Universal Testing Machines
Characteristics:
- Capacity: 100 to 300 kN
- Resolution in Force: 3 N
- Accuracy measure Strength: ≤ ± 0.5%)
- Resolution in displacement: 0.001 mm
- Accuracy measured displacement: ≤ ± 1%)
- Travel mobile crosspiece: 1100 mm
- Separation between columns: 600 mm
- Standard Speeds: 0.05 – 500 mm / min.
- Separation between adapters: 1100mm
- Electric current: 380V / 50Hz – 400V / 60Hz Three phase.
- Approximate power: 3 Kw
- Working environment temperature condition; 10 ºC ~ 35 ºC
- Moisture Condition: 20% -80%
FUNCTIONAL TECHNICAL CHARACTERISTICS
UNIT CONTROL
- PC Control and METROTEST Material Testing Software
- Sample breaking level (% force drop at end of test)
- Force and Extension Peak Maintenance in Tension or Compression
- Selection of units of force and deformation
- External control mode for ”All-in-One” Touch Screen 22” PC
- RS-232 serial port
FORCE MEASURE
- Range: 2% to 100% – Accuracy 0.5% of applied force
- Force Accuracy: Class 0.5 (accuracy ± 0.5%)
- Load Reading resolution: 1/200.000 points
- 1/100.000 in Tension
- 1/100.000 in Compression
- SamplingSpeedForceData (internal): 30.000 S/second
- Units Selection: Kg – N or Lb
- Overload protection (Load Cell)
- Programmable pre-load
- High speed converter A/D of 18 bit
STROKE MEASURE
- Direct measurement from screw balls driving
- Single measurement range (1 scale)
- Reading resolution: 0,001 mm
- Self-return accuracy, better than 0.05 mm
- Selectable Units: Millimeters and Inches
- Programmable extension limits
SPEED TEST CONTROL
- Variable speedrange(see table)
- Variable speedreturn withinrange (see table)
- Preset speedResolution: < ± 02 mm/ minute
- Speed accuracy: < ± 5%
- Pre-load speedvariable within therange (see table)
- PowerProtection System
- Drivebyservo motor
The Testing Machine in standard supply is equipped with:
- 300 kN Tensile / Compression Load Cell
- METROTEST Advanced Testing Software – Multilingual
- Pack of Statistics: Bar Graphs – Gaussian Bells and Comparison of References
- All-in-One PC Touch Screen with 22 “Monitor Panoramic
- ENAC Calibration Certificate (equivalent to NIST Certificates – UKAS – DKD …)