RB-10D
Rebound Resilience Tester
The RB-10D Rebound Resilience Tester determines the rebound percentage of a hammer measured over its height of fall on rubber or elastomeric test pieces, covering 0-100% bounce rate at a 90° drop angle. Standard test pieces are circular, 44.6mm diameter and 6mm thick.
Rebound Resilience Tester
The test apparatus allows determination of the percentage of rebound of the hammer measured on its height of fall. The test piece used is circular, 44.6mm in diameter and 6mm thick. Otherwise, a piece of round or square rubber, of approximate dimensions, may be used.
Characteristics
The test apparatus allows determination of the percentage of rebound of the hammer measured on its height of fall. The test piece used is circular, 44.6mm in diameter and 6mm thick. Otherwise, a piece of round or square rubber, of approximate dimensions, may be used.
- Power: 0.5 Joules – 5 Kg.cm
- Rebound rate: 0-100%
- Drop angle: 90°
Applications
Ideal for determining the resilience and shock absorption properties of rubber and elastomeric materials for quality control and research and development purposes.
Talk to the Techotrix team to find out whether the RB-10D is the right rebound resilience tester for your rubber material testing.
| Power | 0.5 Joules – 5 Kg.cm |
| Rebound Rate | 0–100% |
| Drop Angle | 90° |
| Standard Test Piece | Circular, 44.6mm diameter x 6mm thick |
Alternative test pieces of round or square rubber (approximate dimensions) may also be used where a standard circular sample is not available.
Contact the Techotrix team to confirm the right RB-10D configuration for your rubber resilience testing requirements.
